Short, practical notes for chain drive replacement, bore specification, belt drive pairing and distributor-ready maintenance requests.
2026-09-07 | Martin Engineering Desk
A procurement-focused guide to buying Martin Sprocket parts from local distributors, pairing stepper motors with Arduino, checking how fast a stepper motor can turn, and choosing mechanical disc brakes without hidden costs.
Continue Reading2026-09-04 | Martin Engineering Desk
When a machine goes down, the right fix depends on the failure. Learn how to choose between a timing belt kit, V-belt pulley, or VFD, and how Martin Sprocket distributors and the Martin Sprocket & Gear Fort Worth branch fit into an emergency sourcing plan.
Continue Reading2026-09-04 | Martin Engineering Desk
A procurement manager’s honest take on ball bearing vs roller bearing, including AC motor and crossed roller bearing lessons and why a documented spec matters.
Continue Reading2026-09-03 | Martin Engineering Desk
How do you decide between a ball bearing and a roller bearing? A cost controller shares the checklist for sourcing drive chain, induction motors, and Martin Sprocket & Gear components without hidden costs.
Continue Reading2026-09-03 | Martin Engineering Desk
An application engineer at Martin Sprocket Canada explains why timing belt repair needs more than a belt, what disc brake quiet really involves, what's a servo motor, and when cheap parts are the right call.
Continue Reading2026-09-02 | Martin Engineering Desk
An honest FAQ from an engineer who has ordered (and messed up) Martin Sprocket & Gear parts: Fort Worth branch tips, linear actuators, gear reducer specs, and what uses a bevel gear.
Continue Reading2026-09-02 | Martin Engineering Desk
A procurement manager's practical guide to Pete Jackson gear drive replacements, Martin Sprocket & Gear in Fort Worth and Arlington TX, linear bearings, and disc brake system decisions.
Continue Reading2026-08-31 | Martin Engineering Desk
A practical FAQ from a quality inspector about Martin Sprocket and Gear Inc., how to verify Martin Sprocket and Gear suppliers, what a Louis V belt is, AC motor speed control, and what uses a bevel gear.
Continue Reading2026-08-31 | Martin Engineering Desk
Roller chain, double helical gear, or stepper motor—which fits your application? A quality manager breaks down each one's sweet spot and how to decide.
Continue Reading2026-08-31 | Martin Engineering Desk
A quality inspector explains why roller chain sprockets wear, shaft couplings fail, and stepper motor speed questions miss the point—and what to ask instead.
Continue Reading